HeatLabs

Warming up0%

HeatLabs

Electric hamam · Kashmir

Warmth that risesfrom the ground up

05 · Then & now

The hammam, without the fire.

For generations the hammam kept Kashmiri homes warm: a stone floor over a wood fire. We kept the idea, warmth that rises from the ground up, and took out the fire.

Wood-fired hammamA stone-slab floor over a firebox, fed by hand.Then
HeatLabs electric hammamA thin heating cable under the floor, run by a thermostat.Now
01Heat source
ThenTraditional: Firewood burned in a chamber beneath the stone floor.
NowHeatLabs: Electric cable laid beneath the floor finish.
02Getting warm
ThenTraditional: Hours of stoking before the stones warm through.
NowHeatLabs: Runs on a schedule: warm before you wake.
03Daily effort
ThenTraditional: Wood hauled, fire tended, ash cleared, every day of winter.
NowHeatLabs: Set the thermostat once. Nothing to carry or clean.
04Air & safety
ThenTraditional: Smoke, soot and fumes to vent; an open fire under the house.
NowHeatLabs: No combustion, no smoke, soot or fumes indoors.
05Evenness
ThenTraditional: Hottest over the firebox, cooler toward the far wall.
NowHeatLabs: Even warmth across the whole floor.
06Control
ThenTraditional: The heat rises and falls with the fire.
NowHeatLabs: A thermostat in every room, set to the degree.
07Where it fits
ThenTraditional: One dedicated room, built in with the house.
NowHeatLabs: Any room: under tile, stone, wood or your carpet.

The warmth your family needs minus the smoke, mess and hassle. Just turn the knob and let the comfort begin.

Electric hamam, explained

Everything to know about an electric hamam in Kashmir

01

What is an electric hamam?

An electric hamam is electric underfloor heating: a thin heating cable laid on insulation beneath your floor, covered in screed and controlled by a thermostat. It warms the whole floor evenly, so the room warms from the ground up, like a traditional Kashmiri hamam, but with no wood, fire or smoke.

It goes under tile, marble, stone, wood or the carpet you already have, in any room. The cable is rated IPX7 waterproof, so it is safe in bathrooms too.

02

How is an electric hamam different from a traditional stone hamam?

A traditional hamam burns firewood under stone slabs and needs daily stoking, ash clearing and a flue. An electric hamam runs on a thermostat with nothing to carry or clean and fits in any room. The stone hamam still has one real advantage: it keeps working, and stays hot for hours, without electricity.

03

How much does an electric hamam cost in Kashmir?

Installed, an electric hamam costs ₹220–₹600 per sq ft depending on the heating-cable brand, so a 100 sq ft room comes to about ₹22,000 – ₹60,000. It uses about 2 units an hour per 100 sq ft at full output, and less once the thermostat starts cycling. The site visit and quote are free.

04

Does an electric hamam work during power cuts?

Not while the power is off: it needs electricity to heat. But the warm screed holds heat: in a well-insulated room with doors closed, the floor stays comfortable for up to 4 hours after a cut. Run it during supply hours to bank warmth. For long daily outages, a generator or a stone hamam as backup is the honest answer.

05

Where can an electric hamam be installed?

Anywhere with a floor and a power supply: bedrooms, living rooms, bathrooms and kitchens, as well as mosques, offices, hotels, hospitals and schools. Each room or zone gets its own thermostat, so you heat only the spaces in use.

  • 01

    Homes

    Bedrooms, living rooms and the room the family gathers in, under the carpet you already have.

  • 02

    Bathrooms

    Warm tiles and a floor that dries fast, with an IPX7 waterproof cable.

  • 03

    Mosques

    Prayer halls and wuzu areas, zoned and timed around the five prayers.

  • 04

    Hotels and guest houses

    Room-by-room control, so empty rooms cost nothing to keep.

  • 05

    Offices and shops

    Silent, invisible heat with no heaters taking up floor space.

  • 06

    Hospitals and schools

    No combustion, no hot surfaces at hand height, even warmth throughout.

06

How is an electric hamam installed?

We visit, measure and quote first. On the day, about 2 to 3 inches of the floor is broken out, then insulation, heating cable and screed go down and the floor is re-laid at its original level, typically 5 to 6 hours including civil work. After 5 to 6 days of curing, the system runs for its first 24 hours.

  1. Step 01

    We call you back

    A quick chat about your home, your rooms and how you heat them today.

  2. Step 02

    Free site visit

    We measure up, check your floors and supply, and give you a clear, fixed quote.

  3. Step 03

    Installation

    Insulation, heating cable and screed under your floor, about 5 to 6 hours including civil work.

  4. Step 04

    First warmth

    Wait 5 to 6 days for the screed to cure, run it for 24 hours, then set your thermostat.

FAQ

Electric hamam: quick answers

  • Is an electric hamam safe?

    Yes. There is no combustion, so no smoke or fumes, and the cable is sealed in screed and rated IPX7 waterproof. The floor never exceeds 60 °C, and rugs and furniture can sit on it safely.

  • How many units of electricity does an electric hamam use?

    About 2 units an hour per 100 sq ft while heating at full output. Once the floor is warm, the thermostat cycles and use drops.

  • How long does installation take?

    About 5 to 6 hours including civil work, then 5 to 6 days before the first switch-on.

  • What guarantee do I get?

    The heating cable is guaranteed for 15 or 25 years depending on brand, and the thermostat for 2 years.

  • Can it go under my Kashmiri carpet?

    Yes. The carpet stays where it is; the floor beneath it does the warming.

Your floor, warm by next winter

Bring the hammam home.

Free site visit and a fixed quote. Call +91 90703 33366 or request a call back.